PT Bisa Mandiri Strategi Investasi – Sebagai induk manajemen dari BMD Technology Centre memiliki fasilitas laboratorium kalibrasi. Kompetensi laboratorium kalibrasi kami mencakup: Kalibrasi Kelistrikan, Massa, Gaya, Dimensi, Mechanical, Electrical, Waktu, Instrument Analitik/Kimia dan lain sebagainya. Perusahaan kami sangat berpengelaman dalam memberikan jasa kalibrasi , terbukti hingga saat ini telah banyak memberikan Jasa Kalibrasi untuk banyak perusahaan baik yang berasal dari BUMN, Instansi Pemerintah, Perusahaan Swasta, PMA, Institusi Pendidikan, LSM, Lembaga Non Profit dan lain sebagainya.
Adapun beberapa alat yang bisa kami kalibrasi meliputi:
| No | Jenis/Nama Alat/Aplikasi | Range/Kapasitas | Ket |
| Lingkup: Suhu | |||
| 1 | Temperatur Sensor With Display | 0°C – 1000°C | – |
| 2 | Waterbath | 0°C – 150°C | – |
| 3 | Oil Bath | 0°C – 300°C | – |
| 4 | Oven | 25°C – 250°C | – |
| 5 | Autoclave | Mak. 300°C | – |
| 6 | COD Reaktor | Mak. 1000°C | – |
| 7 | Heating Digestion | Mak. 1000°C | – |
| 8 | Nitrogen Evaporator/ waterbath | Mak. 1000°C | – |
| 9 | Thermo Heating Block | Mak. 1000°C | – |
| 10 | Destilasi/Destilator | Mak. 1000°C | – |
| 11 | Chiller | -20°C – 30 °C | – |
| 12 | Show Case | Ambient – 30°C | – |
| 13 | Kulkas | -20°C – 30 °C | – |
| 14 | Inkubator | 30°C – 80°C | – |
| 15 | Destruksi Protein | Kap. 1000°C | – |
| 16 | Freezer/Refrigerator/Cold Storage | -20°C – 30°C | – |
| 17 | Furnace | Kap. 1000°C | – |
| 18 | Thermohygrometer | – | – |
| 19 | Termometer Glass/Analog | – | – |
| 20 | Termometer Tahanan Platina (Sensor, PT100) | -40°C ~ 500°C | – |
| 21 | Sensor Termokopel Wire | -40°C ~ 500°C | – |
| 22 | Termometer Infra red | Mak. 1000 °C | – |
| 23 | Termometer Digital | Mak. 1000°C | – |
| 24 | Termometer Karamel | Mak. 1000°C | – |
| 25 | Termometer Tusuk/Dinding/Ruangan | Mak. 1000°C | – |
| 26 | Termometer Truck | Mak. 1000°C | – |
| 27 | Temperatur Transmitter | Mak. 1000°C | – |
| 28 | Anteeroom Thermometer Digital | -20°C – 1000°C | – |
| 29 | Frozen Room Thermometer Digital | -20°C – 1000°C | – |
| 30 | Chiller Room Thermometer Digital | -20°C – 1000°C | – |
| 31 | Heat Sealer | Kap.1000°C | – |
| 32 | Data Loger | Kap.1000°C | – |
| 33 | Termometer Analog Payung | Kap.1000°C | – |
| 34 | Dry Bath | Kap.1000°C | – |
| 35 | Honeywell Cooking | Kap.1000°C | – |
| 36 | Fryer | Kap.1000°C | – |
| 37 | Boiler/Heat Exchanger/Evaporator/Cooling Tower | Kap.1000°C | – |
| 38 | Steamer | Kap.1000°C | – |
| 39 | BOD Inkubator | Kap.1000°C | – |
| 40 | Infra Red Termometer | Kap. 1000oC | – |
| 41 | Digital Termometer | Kap. 19 oC | – |
| 42 | Heating COD Reaktor | Kap. 150oC | – |
| 43 | Anemometer | – | – |
| 44 | Friability Tester | Kap : 25 rpm | – |
| 45 | Mesin Coating | Kap . 6-10 rpm | – |
| Lingkup: Massa | |||
| 1 | Anak Timbangan | Kelas E2, Mak: 500g | – |
| 2 | Anak Timbangan | Kelas F1, Mak: 500g | – |
| 3 | Anak Timbangan | Kelas F2, Mak: 10 Kg | – |
| 4 | Anak Timbangan | Kelas M2, Mak: 30 Kg | – |
| 5 | Anak Timbangan | Kelas M1, Mak: 30 Kg | – |
| 6 | Timbangan Analitik | Kap. 120 g, 210 g & 510 g | – |
| 7 | Timbangan Digital | Kap. 1 Kg – 10000 Kg/10 Ton | – |
| 8 | Timbangan Mekanik/Gantung/Jembatan Timbang | Mak. 10000 Kg/10 Ton | – |
| 9 | Moisture Analyzer | Kap. 1000g | – |
| – | – | ||
| – | – | ||
| – | – | ||
| – | – | ||
| Lingkup: Volumetrik | |||
| 1 | Gelas Ukur | Kap. Mak:1000ml | – |
| 2 | Labu Ukur | Kap. Mak:1000ml | – |
| 3 | Pipet Ukur | – | – |
| 4 | Pipet Gondok | – | – |
| 5 | Mikropipet | – | – |
| 6 | Beaker Glass | Kap. Mak:1000ml | – |
| 7 | Piknometer | Kap. Mak:1000ml | – |
| 8 | Buret | Kap. Mak:1000ml | – |
| 9 | Labu Erlemayer | Kap. Mak:1000ml | – |
| 10 | Dispenser | Kap. Mak:1000ml | – |
| 11 | Botol Winkler | Kap. Mak:1000ml | – |
| 12 | Repeater Pipet | Kap. Mak:1000ml | – |
| 13 | Labu Cassia | Kap. Mak:1000ml | – |
| 14 | Pipet Aid | – | – |
| 15 | Mikropipet Ependorf | 2-20 mikron | – |
| 16 | Mikropipet | 20-200 mikron | – |
| 17 | Mikropipet Eppendorf | 2-20 mikron | – |
| Lingkup: Alat Uji Kimia/Instrumen Analitik/Alat Bantu Laboratorium | |||
| 1 | Spektrofotometer UV/VIS | 241nm – 890nm | – |
| 2 | pH meter | 4, 7, 10 | – |
| 3 | Turbidimeter | Mak. 4000NTU | – |
| 4 | Conductivity | 1.408µS/cm, 12.817µS/cm,108.600µS/cm | – |
| 5 | Dissolve Oxygen Tester (DO Meter) | 8.15mg/L (ppm) | – |
| 6 | AAS (Atomic Absorption Spetrofotometri) | – | Verifikasi |
| 7 | Gas Chromatography) | – | Verifikasi |
| 8 | HPLC (High Performance Liquid Chromatography) | – | Verifikasi |
| 10 | Inductance Couple Plasma ICP | – | Verifikasi |
| 11 | Refraktometer | – | – |
| 12 | Diluter | – | – |
| 13 | PCR | – | – |
| 14 | Polarimeter | – | – |
| 15 | TDS | – | – |
| 16 | Kjeltec Auto | – | – |
| 17 | Soxtec | – | – |
| 18 | Sentrifuge | – | – |
| 19 | Laminar Air Flow | – | Verifikasi |
| 20 | Flame Photometer | – | – |
| 21 | Mesin Chikka | – | – |
| 22 | Colorimeter | – | – |
| 23 | Suchromat | – | – |
| 24 | Anemometer | – | – |
| 25 | Salinitas | – | – |
| 26 | Hot Wire Anemometer | – | – |
| 27 | Melt Flow Index | – | – |
| 28 | Tensimeter raksa | – | – |
| 29 | Regulator Oksigen | – | – |
| 30 | Ultrapure Water | – | – |
| 31 | Daktilometer | – | – |
| 32 | Saybolt Furol | – | – |
| 33 | Ultrapure Water | – | – |
| Lingkup: Waktu/Frekuensi | |||
| 1 | Stopwatch | 60Sec | – |
| 2 | Jam Dinding | 60Sec | – |
| 3 | Timer Pada Mesin | 60Sec | – |
| 4 | Frequency Counter | 10 Hz ~ 3.2 GHz | – |
| 5 | Frequency Source | 5 MHz, 10 MHz | – |
| 6 | Synthesized Signal Generator | 10 Hz ~ 1300 MHz | – |
| 7 | Stroboscope | 60 ~ 20.000 rpm | – |
| 8 | Tachometer | 30 ~ 99.000 rpm | – |
| 9 | Spectrum Analyzer | 10 Hz ~ 1300 MHz | – |
| 10 | Multiproduct Calibrator | 10 Hz ~ 2 MHz | – |
| 11 | Plug Tester (Magnet Tester) | – | – |
| 12 | Digital Hand Held Pocket Refractometer | – | – |
| 13 | Black Light Meter | – | – |
| 14 | Lux Meter | – | – |
| 15 | Light Meter | ||
| – | – | ||
| Lingkup: Dimensi | |||
| 1 | Optical Flat & Paralel | – | – |
| 2 | Reticle Scale/ reticle/zoom loop | – | – |
| 3 | Standard Scale | Kap. Mak:500mm | – |
| 4 | Caliper Checker | Kap. Mak:600mm | – |
| 5 | Depth Micrometer | Kap. Mak:100mm | |
| 6 | Inside Micrometer | Kap. Mak:200mm | – |
| 7 | Height Gauge | Kap. Mak:600mm | – |
| 8 | Roughness Machine (Precision Roughness Specimen) | – | – |
| 9 | Gauge Block | Mak. Grade 0 | – |
| 10 | Ring Gauge | >150 mm | – |
| 11 | Squere Ruler | <600mm | – |
| 12 | Theodolite Mekanik | Kap. 60” | – |
| 13 | Theodolite Digital | Kap. 60” | |
| 14 | Auto-Level | Kap. Mak:6mm/1000mm | – |
| 15 | Tilting-Level | Kap. Mak:2mm/1000mm | – |
| 16 | Jangka Sorong/Vernier Caliper/Sigmat | Kap. Mak: 500mm | – |
| 17 | Outside Micrometer | Kap. Mak: 500mm | – |
| 18 | Straight edge/Besi Pelurus | Kap. Mak: 500mm | – |
| 19 | Ultrasonic Thickness Gauge | Kap. Mak: 20mm | – |
| 20 | Dial Thickness (Manual/Digital) | Kap. Mak:500mm | |
| 21 | Rool Meter/Tape Ruler/Penggaris Besi/Baja | Kap. Mak:1000mm | – |
| 22 | Depth Caliper | Kap. Mak:300mm | – |
| 23 | Dial Test Indicator | Kap .Mak:2mm | – |
| 24 | Dial Indicator | Kap. Mak:50mm | – |
| 25 | Pin Gauge | Kap. Mak:60mm | – |
| 26 | Plug Gauge | Kap. Mak:50mm | – |
| 27 | Bore Gauge | Kap. Mak:10mm | – |
| 28 | Dial/Digital Thickness Gauge | Kap. Mak:30mm | – |
| 29 | Profil Projector | Kap. Mak:300mm | – |
| 30 | Measuring Microscope | Kap. Mak:300mm | – |
| 31 | Hammer Test | – | – |
| 32 | Laser Worker Level | – | – |
| 33 | Water Pas | Kap.Mak:500mm | – |
| 34 | Sounding Tape | Kap. 20M | – |
| 35 | Meteran Tinggi Badan | Kap. Mak: 750-1900 mm | – |
| 36 | Thread Plug gauge | – | – |
| 37 | Rool Meter | – | – |
| 38 | Ashcroft Gauge | Kap 30 Psi, SN 524-03 | – |
| 39 | Air Pressure Gauge | Kap 220 Psi | – |
| 40 | Mal Ulir | 1/2G | – |
| 41 | Penggaris Stainless | – | – |
| Lingkup: Gaya/Force | |||
| 1 | Torsimeter/Torque Meter | Kap. Mak: 5000Nm | – |
| 2 | Torsi Wrench/Torque Wrench | Kap. Mak: 5000Nm | – |
| 3 | Tensil Bonding Strenght | Kap. Mak: 5000Nm | – |
| 4 | Puhpull | Kap. Mak: 50Kgf | – |
| 5 | Tension Gauge | Kap.Mak:5Kgf | – |
| 6 | Presure Test Gauge | 60 Bar | – |
| 7 | Presure Gauge | 60 Bar | – |
| 8 | Dial Torque | ||
| 9 | Klem Wire Rope, Climbing | 113.4 Kg | Verifikasi |
| 10 | Stength Tester | 0-4000N | – |
| 11 | Strength Fen | 0-21 N | – |
| Lingkup: Kelistrikan | |||
| 1 | AC Voltmeter | Kap. Mak:1000V | – |
| 2 | DC Voltmeter | Kap. Mak:1000V | – |
| 3 | AC Amperemeter | Kap. Mak:20A | – |
| 4 | DC Amperemeter | Kap. Mak:40A | – |
| 5 | Resistance | Kap. Mak:5MW | – |
| 6 | Distorsi | – | – |
| 7 | Phase Detector | – | – |
| 8 | Multimeter | – | – |
| 9 | Tesla Meter | – | – |
| 10 | Gloss Checker | – | – |
| 11 | Cable Grounding Tester | – | – |
| 12 | Hybrid Recorder | – | – |
| 13 | Cable Locator | – | – |
| 14 | Aperless Recorder | – | – |
| 15 | Rotating Laser | – | – |
| 16 | Digital Environment Multimeter | – | – |
| Lingkup: Akustik & Vibrasi | |||
| 1 | Accelerometer | Kap. Mak:5kHz | – |
| 2 | Sound Calibrator | Kap. Mak:114 dB@250Hz | – |
| 3 | Audiometer | Kap. Mak:120dB | – |
| 4 | Loudspeaker | Kap. Mak:16kHz | – |
| 5 | Absorption Coef (Koefisien Absorpsi Bahan) | 0 ~ 100% ABS | – |
| 6 | Microphone 0.5 inch | 31.5 Hz ~25 kHz | – |
| 7 | Microphone 1 inch | 63 Hz ~ 8 kHz | – |
| 8 | Noise Level (Tingkat Kebisingan) | 25 ~ 130 dB | – |
| 9 | Pistonphone | 124 dB @ 250 Hz | – |
| 10 | Sound Level Meter | 20 ~ 140 dB | – |
| 11 | Sound Power | 100 Hz ~ 10 kHz | – |
| 12 | Vibration Meter | 0.3 g ~ 15 g | – |
| 13 | Vibration Test | 0.3 g ~ 15 g | – |
| 14 | Vibration Test System | 0.3 g ~ 15 g | – |
Selain Jasa Kalibrasi yang kami sediakan, kami juga memberikan Jasa Perbaikan Alat-Alat Ukur dan Jasa Perbaikan Alat-Alat Laboratorium yang tertera pada list diatas. Jika dalam list tabel dan data diatas ada yang belum memenuhi kebutuhan perusahaan/institusi/laboratorium pihak bapak/ibu sekalian kami bisa membantunya mengkalibrasi dengan men subkon ke rekanan BMD Laboratory. Silahkan bapak ibu hubungi kontak kami segera atau hubungi Customer Services di 021-29432095